标题:可调螺纹定位注射模设计
作者:许聪艳(嘉亨家化股份有限公司,福建泉州362005)
摘要:分析螺纹盖的定位要求与成型工艺,阐述了成型螺纹起始位置实时可调机构和螺纹旋转脱模组合机构的工作原理,在螺纹旋转脱模齿轮组合中增设模块化的齿轮定位机构,实现在注塑机上实时可调成型螺纹的起始位置。实践证明,模具结构设计合理,工作稳定,可为类似螺纹定位结构的设计提供参考。
关键词:齿轮定位;实时可调;注射模;广口内螺纹盖;旋转脱模
中图分类号:TG76;TQ320.662 文献标识码:B 文章编号:1001-2168(2020)09-0048-05
DOI:10.16787/j.cnki.1001-2168.dmi.2020.09.011
Design of injection mould for adjustable thread positioning
XU Cong-yan(Jahen Household Products Co., Ltd., Fujian, Quanzhou 362005, China)
Abstract: It analyzed the positioning requirements and forming process of the screw cap, and expounded the working principle of the real-time adjustable mechanism at the start position of the screw and the screw rotational demoulding mechanism. The modular gear positioning mechanism was added in the screw rotational demoulding gear combination, so as to realize the real-time adjustable of the screw with start position on the injection machine. The practice showed that the mould structure design was reasonable and the work stably, which could provide reference for the similar screw positioning structure.
Key words: gear positioning; real-time adjustable; injection mould; wide opening internal thread cap; rotational demoulding