作者：唐廷洋1，乔晓勇1，申丹凤2（1.上汽通用五菱汽车股份有限公司，广西柳州545007；2.湖南湖大艾盛汽车技术开发有限公司，湖南长沙410000）
摘要：介绍了高强钢圆角弯曲回弹、立面卷曲回弹、整体扭曲回弹的表现形式，分析了回弹机理，并基于AutoForm 仿真分析软件对冲压成形全工序进行回弹模拟和迭代补偿，提出了通过优化产品结构与冲压工艺来控制高强钢回弹的方法，在CN210S右前大梁成形中取得了良好的效果。
关键词：高强度钢板；回弹分析；弯曲回弹；加强筋；拉深
中图分类号：TG386.41 文献标识码：B 文章编号：1001-2168（2020）10-0027-07
DOI：10.16787/j.cnki.1001-2168.dmi.2020.10.006
Analysis on stamping springback of high strength steel and control method in automobile
TANG Ting-yang1, QIAO Xiao-yong1, SHEN Dan-feng2 (1.SAIC-GM-Wuling Automobile Co., Ltd., Liuzhou, Guangxi 545007, China; 2.AISN Auto R＆ D Co., Ltd., Changsha, Hunan 410000, China)
Abstract: The springback forms of high strength steel such as round angle bending, vertical face curling, and overall twisting were introduced. And the springback mechanism was analyzed. Based on AutoForm simulation analysis software, the springback simulation and iteration compensation of the whole stamping process were carried out. The control method that optimizing product structure and stamping process was proposed, which achieved good results in the right front beam of the CN210S project.
Key words: high-strength steel plate; springback analysis, bending springback; rib; drawing